Flip between your Jumbo and Standard flyers – no need to remove the maiden upright!

• JUMBO: 3/4" front bearing 
• Reducer bush (1/2" for standard flyer)
• Orifice reducer (when spinning finer yarn)

To fit:
Remove the standard front bearing and replace with this item using the existing screw. It is designed to be a snug fit. Pay particular attention to the correct adjustment of the cotton drive band for both flyers on all whorl settings - replace the drive band if necessary.

You can now switch between your standard and jumbo flyers. Insert the reducer bush and orifice reducer as required (use a little wax or wheel oil as it is a tight fit).

Fits Ashford single and double drive spinning wheels only